hi guys my 94 sc auto has a few pain in the @#$%^& problems that has me stumped. !. antilock brake light stays on....along with traction control is off. cant get a code from my snap on code reader (ford uses super star 2 mode...and i get nothing from the scanner in that mode) am i missing some software,plugs?...........2........ HIGH idle on the tb (85mm). on startup it just after 1100rpm then kicks down to 900rpms which seems fine.but problem 3...... put in drive brakes not stopping car as it should . i did check all my vacume lines hoses, etc. can"t find or hear nothing. ...talked to dd and tried a few things....no good. no c e l light. awhile back did a smoke test..all was sealed, did the spray bottle test.nothing....all of parts were up graded a new parts were installed. so high idle in drive not stopping car and not dropping lower making the car hard to stop. so ud say vac leak..........ok where? new master cyl bleed the brakes to get all the air out. im out of things to check n read.......smh.
Last edited: