O-ring part number for high pressure line that connects to EVO valve Help

i got some o-rings from ford, part number 384975-S94, but they fit loose and after installing the side that goes to the connector to the rack i am not convinced. I don't want to re-install the pump and connect to the EVO valve just to have to pull it all apart again after it leaks.

help with a part number would be greatly appreciated.

TIA

Sean

O-Ring: 384975-S94 goes on the EVO where it screws into the pump.

...starting from the end that screws into the pump:

EVO Actuator (all rubber):
O-Ring: 384975-S94
O-Ring: 391032-S
O-Ring: 387571-S100 (x2, inside the pivot fitting that leads to the HP line)

Power Steering High Pressure Line:
Teflon Seal: 388898-S ...line to EVO
Teflon Seal: 388897-S ...line to rack


On the rack as follows:

• Hi Pressure Hose to Rack (rubber, small)
- Ford #388748-S,
Danco 96722 #5 3/8" OD x 1/4" x ID x 1/16" diameter

• Hi Pressure Hose to Pump (rubber, large)
• Low Pressure Hose to Rack (rubber, large)
- Ford #388749-S,
Danco 96723 #6, 7/16" OD, 5/16" ID x 1/16” diameter

Thanks!!!

Sean