Rocker/valve cover

H GREENLEY

Registered User
I am at a stall position in removing the L rocker cover, that is facing engine from front. I have removed throttle body and nessessary hose's, and wiring. I have noticed that there is not much room under the bottom of the inlet plenum and the rocker cover and wonder if I will be able to clear the a/c compressor without removing it, or the inlet plenum.

Hoping for some signs. Don't want the extra headache. :-(
 
Your going to have to MOVE the a/c comp. out of the way.
You DON'T have to remove the lines running to it.
There are 4 bolts that hold it to the bracket to the motor. Take those 4 bolts out and you will be able to move the a/c comp. out of the way enough to get the valve cover off. You will have to play with the valve cover a little bit, but it will come out.

Kurt Sr
 
Back
Top