Air cooler inlet tube

I am about to tackle replacing valve cover gasket on driver side of car and I am wondering, since I dont have a SPANNER RENCH to remove the nut is there a nother method I could use that would not do damage.

Just got the passenger side done. WHAT A JOB.

You can remove the upper intercooler tube and the SC top as one piece. Just be careful not to get trash in the SC. Reseal the top with a thin layer of RTV (sensor safe) gasket sealer. Do Not overtighten the SC top bolts. The SC case is aluminum and you can strip the threads if you over-torque. I think the specs call for around 12ft-lbs.

The passenger side was piece of cake compared to what you're gonna go through on the driver side. If you need 'em, now would be a good time to think about doin' the engine mounts...you'll soon see why.

'bird