Cleaning under ground effects?

joew623

Registered User
I live in an area of massive salt...is it easy to remove the ground effects? like take out some screws along the bottom? or is there snaps and crap too? How to get the ones on the lower part of the door off?? thanks...
 
umm if you see any exterior rot you might not want to see under there. Remove the screws in the wheel wells and unscrew or cut the plastic clips at the bottom(buy new ones first). Them lift the front half of the kit out(might be jammed), then the back, you have to lift up since there is a ledge there. Best way to rinse out the rotting body kit hangers is with a pressure washer, then remove the rear quarter panel speakers and dump some rust neutralizing chemicals or something back there?(at the bottom is where the inside of the quarter panel is).

Remember if the hangers/ledge whatever are badly rotted they might crumble when the kit is removed.
 
Back
Top