Tensioner pulley

layinthesmack31

Registered User
I just put on a set of underdrive pullies and i noticed my tensioner pulley tightens the belt really close to where the belt rides on the water pump pulley. is that a way that i can change the tensioner pulley to make to these dont come in contact with each other? any help here would be greatly appreciated. thanks
Matt
 
buy a smaller belt. Use the numbers on the end of most belts should be like three numbers which will be in mm and see if your parts store can order them in for you. If you change pulley size it will effect the amount of slack in your belt also be careful of getting a belt that is too tight to get back in place.

theid
 
Back
Top