Double Intercooler pics.

[Ryan A Harris]

Can those who have a double I/C please post soem pice with it mounted. I'm ready to swap in my unit, so I'd like to know what the deal is with the bracket from the rad to the I/C. Also not to sure how the I/C unit bolts up to anything.

Thanks in advance.

[NASTY V6]

Actually with the double intercoolers the only thing that supports them is the intercooler tubes. I don't know if I have any pictures but I am sure someone else does.

[David Neibert]

http://members.tccoa.com/dneibert/Double%20IC.jpg


The bracket where the rubber bellows attaches needs to be trimmed back about 1/2". I put some edging on mine to prevent rubbing when engine moves. The radiator fits very tight so postion the IC as close to the battery as possible to avoid damaging the radiator top tank under hard acceleration.

The only thing that holds the double IC are the IC tubes. I would suggest using Copper RTV to seal them instead of teflon tape.

David

[Ryan A Harris]

Yes, thats it. Thanks guys, very muched helped me out.

Again, thanks very much.