Thinner Radiator Fan Shroud

Rich Thomson

Registered User
Anyone know how to or have modified their radiator fan shroud to make it thinner. I am looking at ways to trim 3/4" off the stock shroud or find another Ford shroud that will work (fit). I have considered cutting the front all the way around then reattaching the two pieces with 3/4" taken out.
 
Take a look at the fan/shroud combination from a Taurus. It is the exact same fan, it plugs right in and all. The only thing is that it mounts a little different, but the shroud overall is the same size. I used one on a FMIC settup once. It is at least an inch thinner, maybe more.
 
I saw the Taurus 95 3.8L fan shroud it looked just like the NA 3.8L T-Bird fan. It also looked to be a few inches too wide. The SC shroud is 19" wide.
 
Rich,

Charles Warner supplies a low profile 16" Spal fan and a flat sheet metal shroud as part of his FMIC kit. Maybe he will sell it seperatly. Here is a picture of mine.


Fmic1.jpg


David
 
Back
Top