need help with tranny swap

Nope...The MR52 will not bolt up to the SOHC or DOHC 4.6 motors as the bellhousing bolt pattern is not the same....
 
tranny swap

i heard the only way it will work is using the sc trans due to the length of any other trans like the t45 and stuff are to short and they will put the shifet under the radio
 
There are 2 different 4r70w and AOD/AOD-E cases. One is for the 3.8 and 5.0 cars and the other is for the 4.6 cars.
The MR52 will not bolt up to a 4.6 as it was only used on the 3.8 cars.
 
If you are asking what trans will bolt up...A T45 from a 4.6 mustang will physically bolt to the 4.6 T-Bird motor but you are on your own trying to get the clutch actuation(Stang uses a cable and the T-Bird SC pedals and SC trans use a Hyd. unit) and shifter fabricated.

There is no way you are going to "Bolt In" any 5 speed trans in a 4.6 Bird. Any way you look at it you are looking at a lot of custom fabrication....Best of luck to you.
 
Back
Top