Hello,
Are these the right spec.s for torqueing the (T-Bird SC) head bolts?
.......HEADS.......
first of all get new bolts, the torque sequence is step 1= 37 lbs,,,,,step 2= 45lbs,,,,,,,,,,step 3= 52lbs,,,,,,,,step 4= 59 lbs,,,,,,,then loosen bolts two to three turns then retorque to 45-55 lbs,,,,,, then rotate an additional 90 - 110 degrees.
also while changing my Head Gaskets i noticed that I don't have a EGR valve, just a metel bracket?
THanks guys,
Jerry
Are these the right spec.s for torqueing the (T-Bird SC) head bolts?
.......HEADS.......
first of all get new bolts, the torque sequence is step 1= 37 lbs,,,,,step 2= 45lbs,,,,,,,,,,step 3= 52lbs,,,,,,,,step 4= 59 lbs,,,,,,,then loosen bolts two to three turns then retorque to 45-55 lbs,,,,,, then rotate an additional 90 - 110 degrees.
also while changing my Head Gaskets i noticed that I don't have a EGR valve, just a metel bracket?
THanks guys,
Jerry