coolant level sensor....??

J

jpaitala

Guest
I took the sensor of from the coolant overflow tank and found out this....
Is this ok?? Or does all those three "pins" need to be "straight"??

THANKS. :)
 

Attachments

  • anturi.jpg
    anturi.jpg
    4.7 KB · Views: 147
Well, I'd say that pin is definitely bent and should be straightened. Especially, if the level sensor doesn't seem to be working. :) Look at the connector which plugs into it and see why it got bent to begin with.
 
Can you TbirdSCFan or someone else check their connector to see if all those three pins need to be straight.
I cannot run my car now to see if it's working or not.

Thanks.
 
Back
Top