PDA

View Full Version : Mean exhaust?



blown11
02-18-2003, 10:33 PM
I want the exhaust to sound loud and shake you like a TA with a nice exhaust, rumbling thunder feeling. How can I go about doing this? Im not worried about drone or emissions. Would stright pipes from the begning to 2 dynomax mufflers do the trick? any help?

SCme94
02-18-2003, 10:45 PM
If you are looking for a V8 type rumble out of a V6 it is never going to happen. The firing orders are much different and we are 100 or so cubic inches shy of a TA motor.

If you go with straight pipes into 2 dynomax mufflers it is gonna sound loud but ricey. Put a Magnaflow resonator in and it will deepen up the tone quite a bit.

blown11
02-18-2003, 10:48 PM
okay, because the guy I bought the car from had a custom exhaust, but a crappy one at that. Just one pipe coming back into a Y into 2 dynomax mufflers... Is that unsafe for my headgasket?

white90sc
02-19-2003, 12:05 AM
i have 2.5 back to the Y pipe, then a Flowmaster(1) out with two 3" pipes

Jerry

Bill McNeil
02-19-2003, 02:30 AM
If you had a loopey cam, no cats, long mufflers (and good ones), headers, and some decent power, it could reasonably sound somewhat like a V8, especially at idle.

As for sounding just like a Trans Am or any other V8, the difference in engine types just wont allow it.