Do you use a stock belt? The pulley is the ESM Billet 5% thanks in advance! Todd
C cheeriosluvr Registered User Feb 20, 2003 #1 Do you use a stock belt? The pulley is the ESM Billet 5% thanks in advance! Todd
David Neibert SCCoA Admin Feb 20, 2003 #2 I used the stock belt with 5 and 10% overdrive pulleys. Others reported slipping and needed a slightly shorter belt. David Last edited: Feb 20, 2003
I used the stock belt with 5 and 10% overdrive pulleys. Others reported slipping and needed a slightly shorter belt. David
B Bill McNeil Registered User Feb 20, 2003 #3 As long as your belt tensioner is in fine working order, a stock belt can work just fine. I ran it with a 10% for a while. To compensate slightly you could buy some steel idler pulleys, which tend to be slightly larger in size depending on the brand (Dayco).
As long as your belt tensioner is in fine working order, a stock belt can work just fine. I ran it with a 10% for a while. To compensate slightly you could buy some steel idler pulleys, which tend to be slightly larger in size depending on the brand (Dayco).
C cheeriosluvr Registered User Feb 21, 2003 #4 i plan on getting some ESM billet Tensioners soon........ thanks guys for the help! Todd