PDA

View Full Version : Rear Bumper Cover



layinthesmack31
03-03-2003, 09:16 PM
I was just wondering how hard it is to remove the rear bumper cover? can anyone give me the step by step process to doing this? and once it is off does it go on easy or will it be a pain in the @ss? Any help would be greatly appreciated :) thanks
Matt

MadMikeyL
03-03-2003, 10:44 PM
-Take out the screws along the wheel wells
-Inside the trunk, there will be I think 2 nuts on either side, and then about 5 or so along the back of the car. I believe you will also have to take out the tail lights to be able to slide the bumper cover off.
-Now go under the back of the car. There will be a bunch of plastic clips along the bottom of the bumper cover. Use a vice-grips to pull the center of them out, and then the outer part will come out easily.

That should be it. Just pull out the sides and then slide the whole thing back. To put it back on reverse the procedure.