sunroof problem

All of a sudden my sunroof stop has moved. What I mean is that when you press the button to either move it up or back the stop/gap programed into it to get it to stop precisely at closed position has now moved to when I am opening it about 5 inches. This means that when you go to close it it will just go right passed the closed position and tilt up in the rear. Have to guess when to take your finger off the button.

What went out of whack here and is this a do it yourself project.

Thanks

See my post here. Mine was doing the same thing. You have to do the reset or synchronize procedures.

http://www.sccoa.com/forums/showthread.php?p=315491&posted=1#post315491