installing MPII blower, gasket question.

cinstral

SCCoA Member
i'm going to be installing my new blower and the question is:

can i use copper rtv for the following gaskets:

1.) throttlebody to inlet plenum
2.) inlet plenum to supercharger
3.) supercharger to outlet top

Also, does anyone know the torgue specs for the three bolts that hold the blower down? (just recently moved and can't find my chilton's :confused: )

Thanks in advance,
 
Yes you can use copper RTV to seal those surfaces. Put a thin coat on and spread it out with your finger.

All bolts can be tightned pretty snug without hurting them, except for the SC top. I wouldn't go more than 15 ft. lbs. on them.

David
 
Back
Top