Tensioner idler wheel dimensions

To cut through the poop. If U need one go to NAPA and order the idler for a 1993 Mark 8. It is metal (to last a long time) and a little bigger. Not enough to not work but bigger enough to improve tention. I have replaced all of the idlers on both of my SC's and am very pleased.
 
Hmmmm the one I am using is from a 97 Mustang not positive on the year but it is def. from a stang.
steel and a little bigger too they work great!

oh and it came from Ford LMK if you need the part # I can post it later
 
its dayco number 89016.....i work at carquest and thats what i used on mine. Its a 76mm metal pulley with a width of 38mm and an ID of 17mm.
 
Back
Top