View Full Version : parts info needed....

04-01-2003, 08:28 AM
What other brand O2-sensors than Ford "fit" our cars.??
And what would be the part #??
Just asking this because the Local Ford Parts sailesman is asking 120$ for one O2-sensor and this seems a bit high to me. (240$ for O2-sensors. :mad: )


04-01-2003, 08:45 AM
They are all created equal I think...As long as it has the same adapter "These are also Standard" on it...The ealry SC is a 2 or 3 wire I believe, and the 94-95 is like a 3 or 4 wire type...This should be easy to source from any parts store bro...Good luck..I got a pair for my 90SC for 65 bux...


04-01-2003, 12:05 PM
Does anyone have brand and product #??


Bill McNeil
04-01-2003, 12:43 PM
They are a Bosch made o2 originally, and all other companies who manufacture them do so under contract with Bosch.

There are several other brands available, but where you are, I'm not sure how much luck you will have finding them.

If you get stuck, I can get you 2 for under $100, +shipping.

Send me a PM if you're interested.

04-01-2003, 12:47 PM
I was over at Vernons this weekend and he was going to use an O2 from a Mustang. The part# was different as was the connector. You might want to take your O2 to the parts house and match it up with another.


04-01-2003, 12:55 PM
Are both O2-sensors same kind?? (silly question though but....)
So I don't have to take them both out....


04-01-2003, 01:03 PM
They are the same.