PDA

View Full Version : EGR help



ScottSimonsen
04-22-2003, 09:46 PM
On the main exaust tube going to the EGR valve. There is a Nipple about 2 in. down from the egr valve, were or what plugs into it.

Thanks

racecougar
04-22-2003, 10:32 PM
That nipple should have a hose hooked up to it which runs to the PFE sensor. The PFE (Pressure Feedback Exhaust) sensor is a small square gray sensor with one nipple and a 3 wire connector on the underside of it.

-Rod

vancouverBC
04-22-2003, 11:44 PM
The missing hose is special, and not ordinary rubber, made of silicone to handle the exhaust heat w/o drying or cracking and is only about 6" or 7" long. Ford charged me $50. CDN for it, but it does feel different than other hose. Driving w/o it causes never ending detonation. I hope you can find it.

ScottSimonsen
04-23-2003, 12:20 AM
Thanks for the help. Thats where i thought it went, just wanted to make sure.