PDA

View Full Version : Antilock Brake Part Listing Ready for Review



blkthndr
04-23-2003, 04:39 PM
Starting to put these together section by section:

http://www.sccoa.com/faq/fordpartnumberlisting.php?section=abs

Let me know what else needs to be added, what else you would like to see, etc.

-Ron

Rob Noth
04-23-2003, 08:26 PM
When I replaced my accumulator (for the early model ABS), I remember that there were two different part numbers, I think the difference was in the length of the threads. Basically it said to check your thread length and make sure the replacement is the same. Of course this info was on a sheet of paper in the box, so you wouldn't have known until after buying the accumulator...

LJGriggs
04-25-2003, 12:33 PM
The OEM Ford SC ABS Accumulator Part #ís:

P/N E8OY-2C231-A (nipple length= (15.25-15.75)mm (.600-.620)in)
P/N E8OY-2C231-B (nipple length= (11.90-12.10)mm (.476-.469)in)

If you order the Accumulator from Prior Remanufacturing, it has a "universal" thread length.... Just ask for the Accumulator for a "Teves Mark II ABS".