another cam position sensor Question

stangbanger67

Registered User
OK the hanes manual I have says to turn the motor to 26 degrees atdc before dropping in the distributor-like thingy. ( I don't know what to call it) The problem is, the darn balancer is only marked up to 10 degrees atdc. Is this some sort of misprint. Is it suppose to be Btdc?? Because the marks go up to 30 degrees on Btdc. If not, how do I know where 26 degrees Atdc is? There is a grove on the balancer that looks like it could be 26atdc. Is that it? Help!!
 
it is definately 26 degress after top dead center.
the groove in the balancer lines up with the 26 degree mark on the plastic timing indicator, which is mounted surrounding the balancer.
 
Back
Top