Engine Install

mikesc

Registered User
When I removed my engine I did not remove the tranny, thinking I would be able to get it back in w/o very many problems. My car is a '90 automatic. I am having one hell of a time trying to line up the bolts on the torque converter to the holes in the flex plate. I know someone out there has done it, anybody have any suggestions?

Thanks,

Mike
 
Make sure your TC is all the way on or you wont be able to rotate you TC to line up the bolts. This is a common problem. Make sure motor and trany are at the same angle to. also there shoud be about 3/4 of an inch between the flywheel and TC after motor is fully bolted in.
 
Back
Top