PDA

View Full Version : Low Beam not working



jsue1961
05-06-2003, 03:08 PM
Anybody ever have this problem?:

My low beams are not working. Using the switch or automatically. I was able to get them to work for a while by wiggling the turn signal but now they don't work at all. The high beams are fine so I am using that at hight but you can imagine all the flashing I am getting in return. The bulbs are ok as I can get them to turn on if I pull back on the turn signal. I know there was a recall on the switch and this may resolve this issue. Any thoughts????

TBirdDriver
05-06-2003, 03:23 PM
Check the connections on the back of the multifunction turn signal high beam switch. You will probably see that they are loose or not pushed in and seated properly.

jsue1961
05-06-2003, 03:29 PM
T,

How difficult is that to check the switch?

TBirdDriver
05-06-2003, 03:34 PM
You have to remove the plastic cover on the steering column. I think there are 4 screws that hold the two halfs together.
The hardest part is snapping it back together and making sure its lined up properly before you put the 4 screws back in.

jsue1961
05-06-2003, 03:35 PM
Great! Thanks for the info, T. I will look into it tonight.