piston notches

H

hepcat

Registered User
I got turned arround and need to know wish way both sides(left and right) point on the 3.8 sc motor

The notches in the stock pistons that are on the top of them

Thanks

Hepcat75
 
According to the Helms....ensure the notch in the piston and the button on the connection rod faces the front of the engine and the squirt hole on the connecting rod is facing the RH side of the engine.
 
And if you are using stock rods in the same cylinders make sure you have the numbers on the both the rod and the cap lined up on the same side. Just put mine in this weekend.

notice this is cylinder number nine in my super secret; one of a kind V12 SC......
 

Attachments

  • may 12th 2003 rod 6.jpg
    may 12th 2003 rod 6.jpg
    26 KB · Views: 113
Last edited:
Here's a shot of the piston.
 

Attachments

  • may 12th 2003 cylinders.jpg
    may 12th 2003 cylinders.jpg
    82.3 KB · Views: 106
notches

Hey thanks alot guys for the help. I really needed that. I got turned arround when I took them out because I took them out upside down from the enine and thought for sure that I had them in order.

Now i get get this puppy put back together and will post some pics.

Thanks again

Raymond
 
You must log in or register to reply here.
Back
Top