View Full Version : Supercharger pully

05-21-2003, 11:16 PM
How is the easiest and fastest way to get the pully off of the supercharger? I've got an '89 pully I want to put on my '95 supercharger. Thanks.

Thomas A
05-21-2003, 11:23 PM
Zip the nut off with and impact wrench, and use a 3-arm puller to remove the pulley. Heating it up a bit with a heat gun also helps, but usually isn't neccesary.


05-21-2003, 11:42 PM
Is a 3 arm pully needed? Or can I do it without?

Thomas A
05-21-2003, 11:44 PM
No, your going to need a puller of somesort. Only way it's coming off. The front nut actually presses it onto the shaft.


David Neibert
05-22-2003, 12:15 AM
Good luck getting it off, I bent the crap out of my stock pulley removing it.


05-22-2003, 12:18 AM
If you try using a 2 arm puller, you'll more than likely bend the back of the pulley. Take the advice and borrow or buy a 3 arm puller, they don't cost much and are common. Good luck

05-22-2003, 12:22 AM
Is this the same puller you would use to remove the balancer?

Thomas A
05-22-2003, 12:34 AM
Nope, two different styles of pullers.


05-22-2003, 01:04 AM
Most of the chain autopart stores have loaner tools, you leave a deposit and get it back when you return the tool.

05-22-2003, 01:16 AM
Yeah, I love taking adv. of Autozone benefits.:)

05-22-2003, 02:00 AM
If you want to re-use the pulley, use a 3 arm. 2 arm WILL bend it in most cases.