Supercharger pully

007_SuperCoupe

Registered User
How is the easiest and fastest way to get the pully off of the supercharger? I've got an '89 pully I want to put on my '95 supercharger. Thanks.
 
Zip the nut off with and impact wrench, and use a 3-arm puller to remove the pulley. Heating it up a bit with a heat gun also helps, but usually isn't neccesary.

Thomas
 
No, your going to need a puller of somesort. Only way it's coming off. The front nut actually presses it onto the shaft.

Thomas
 
If you try using a 2 arm puller, you'll more than likely bend the back of the pulley. Take the advice and borrow or buy a 3 arm puller, they don't cost much and are common. Good luck
 
Back
Top