In-Line Spout connector

K

KClarke

Guest
In-Line Spout connector

I'd like to check the timing on my 1991 3.8 n/a but can't find the in-line spout connector. Hopefully it is the same location as SC motors, so that might be a good starting point.

thanks,
keith
 
Re: In-Line Spout connector

Or did I. The photo on TCCoA is a 4.6L. 3.8s are way different. Would still appreciate any assistance finding the in-line spout, or what ever it takes to set a 3.8 n/a to base timing.
 
Re: In-Line Spout connector

Keith my Taurus book shows the spout connector inline with the connector that goes to the ignition TFI modulle that is mounted on the side of the distributor. The picture is of a 3 litre but it says the 3.8 is in a similar location. Hope this helps. The spout plug itself looks just like the t-bird ones.
 
Back
Top