Just changed the clutch,pressure plate,trowout bearing,rear main seal,tailshaft seal,and slave cylinder.Now I have no clutch pedal,tried bleeding as shown in ford manual,still no pedal. Does the tube on the bleeder have to be fed back into the master cylinder reservior? Seems like I get a half a pedal then none.Is my master cylinder for the slave cylinder no good? Book says there shouldn't be any free play in the pedal,but mine has always had free play. Any help would be appreciated. Thanks, Bob Correa. P.S. aprox.4.5 hrs to do clutch,book gives 9hrs.