I am begging! please identify these peices!

sizemoremk

Registered User
I have pulled out my dash and heater box to replace evaporater and heater cores.

There are these peices that I din't see before in there, and I am trying to get it back together and don't know what to do with them....

It looks like they may go behind the heater box on the screws that go throught he firewall, but I can't tell for sure.

please help!!!!

fbeec9c2.jpg
 
put those in the holes where the heater box studs thread thru(on firewall), they are for vibration and help align the heater box when installing it. The tabs are probably broken off, so epoxy or silicone seal them in place until the glues dry. Should be 3 or 4 of them
 
thank ya sir!

I already siliconed em in there cuz that was all I could think of... so now I'll put the box on....

i guess this has been done before, cuz there's only 2 in there....


This has been a royal pain in the arse!

thats why I replaced both the heater core and evaporator core!

Thanks!
 
Back
Top