bumper touch up

now a tbird guy

Registered User
whats the best way to touch up these bumpers of mine. front and rear drivers side corners are chipped and stuff.

MVC-014F.JPG


MVC-013F.JPG
 
if theres holes i would try duraglas or tiger hair apply some then start sanding the excess off right away after duraglas gets hard its hard as a rock then some primer
and sand away
, then after a few coats of primer and sanding maybe some spot putty i would try some dupont base coat then after sanding base and a few coats give it some clear
 
Last edited:
twilight blue :) mmmmm. Yea, wet sand with 600? till its all smooth, then primer, then wet sand LIGHTLY then apply top coat (twilight blue:) ) from a spray can, try to blend it in. Then buff after its dry for a few days with POLISHING compound, not rubbing compound:eek: then apply wax
 
Back
Top