Dave Neibert.

I had a question about the trans cooler. The b & M. I was installing it and the line that leads back to the tranny after the cooling process,I cannot thread one of the nozzles from the kit onto it. I know you have one and was wondering how you did it.

I am not sure if you know what im talking about, but the nipple that they gave me in the bag will not screw onto the tranny line end because its not deep enough.

I screwed the barbed fitting into the output side of the cooler in the radiator, then I cut the line that screws into that port with a tubing cutter and double clamped the hose on in instead of using the fitting.

I had a leaking hose anyway, so it solved two problems doing it that way.

David

David Neibert said:

I screwed the barbed fitting into the output side of the cooler in the radiator, then I cut the line that screws into that port with a tubing cutter and double clamped the hose on in instead of using the fitting.

I had a leaking hose anyway, so it solved two problems doing it that way.

David

Click to expand...

Well damn, mines leaking to, I thought about just cutting it way back there anyways also. Thanks man!!