PDA

View Full Version : Pics of my new Setup


Thomas A
06-20-2003, 12:53 AM
Thought I'd share some pics of my new setup. Took me 6 months and a lot of headaches, but I got it put together with the help of a lot of great guys. Just need to get a MP cool air divider and get it tuned. Sorry about the pics, it was getting kinda dark out. Let me know if you have any questions.

http://members.tccoa.com/93supercoupe/MP_Engine3.jpg

http://members.tccoa.com/93supercoupe/MP_Engine2.jpg

http://members.tccoa.com/93supercoupe/MP_Engine4.jpg

http://members.tccoa.com/93supercoupe/MP_Engine5.jpg

CURRENT MODS:
Removed Air Silencer
K&N 9" Conical Filter
Pro-M 87mm Chrome MAF
Magnum Powers Intake
Magnum Powers 85mm Throttle Body
Magnum Powers Inlet Plenum
Magnum Powers Maganport II Blower
Magnum Powers 3/4" Raised Top
Magnum Powers Front Mount IC
ESM 5% OD SuperCharger Pulley
Port Matched Intake Manifold
Ported Stock Heads/ARP Head Studs
3 Angle Valve Job w/Crane Springs
Oversized SS Valves
.532 Lift, .224 Duration Cam
Scorpion 1.73 Roller Rockers
FRPP Roller Lifters
8 Tooth Oil Pump
Lucas 42# Injectors
Walbro 255FI Pump
March Aluminum UD Pulleys
SCI Aluminum Jackshaft Pulley
BHJ Harmonic Balancer
Propane Injection Kit
Lentech Street Terminator Valve Body
Lentech 12" Non-locking Torque Convertor
Lentech Hardend Input Shaft
B&M Tranny Cooler
Twin Spal Cooling Fans
Robert Shaw 180 Thermostat
8.5mm Magnacore Wires
FRRP Double Plat Plugs
Ported Stock Exhaust Manifolds
2.5" Dynomax Super Converter Cats
2.5" Dynomax Super Turbo Mufflers
2.5" True Dual Pipes


Thomas

Ripvanbl
06-20-2003, 01:00 AM
Shizam! Nice mod list and pics.

Randy N Connie
06-20-2003, 01:21 AM
OOH! looks nice.bet it's fun to drive.

Looks like a lot of $$.It's time for the peanutbutter sandwich diet.:D

rivlee
06-20-2003, 02:31 AM
Even with my IC tubes polished, your setup looks sooo much cleaner and pretty! NIce. :D

Lee

motocross_masta
06-20-2003, 02:06 PM
How far do u get w/o having to refill?:D

shotbirdsc
06-20-2003, 02:28 PM
Wow, Nice work!!

Do you have a closer picture of the March pullies installed?

Eric

Douglas Walker
06-20-2003, 06:54 PM
Wow looks good Tom.
I'll have to take a closer look the 22nd.
Doug

007_SuperCoupe
06-20-2003, 06:57 PM
Looking good, Tom. You going to have her at the meet this weekend, or are you going to wait until she's tuned? If you're not going to have it there, I might just have to take a trip over there to see it for myself! Too bad you don't have it tuned. Tonight is the open night at Scribner. You'll hit your goal, I'm sure.

blown11
06-20-2003, 08:56 PM
Wondering where you got the chrome peice that the upper ic tube attaches to?

Melon
06-20-2003, 10:43 PM
I said it before.. and I'll say it again.. DAAAAAMN

I'm anxious to see what kind of power your putting down. If you take it to Scribner some night, I will make time to come up to watch. Nice job man

-Andy "Melon'

Thomas A
06-21-2003, 12:48 AM
Thanks everyone. I'll try and answer some questions:

Wondering where you got the chrome peice that the upper ic tube attaches to?
It's just the stock one that I had polished.

You going to have her at the meet this weekend
Hopefully, we'll have to see what the weather is like.

Do you have a closer picture of the March pullies installed?
I don't. I should of taken one with the FMIC still out, becuase now you can hardly even seen them, other then the Alt.

How far do u get w/o having to refill?
Don't know yet. I've only drove about 100 miles since I got it back together.


It's time for the peanutbutter sandwich diet
Big time. I'm having a hard time with that though :D

Thomas

David Neibert
06-21-2003, 01:19 AM
Thomas,

It looks great....if your getting the MP cool air divider, you might as well get the MP chrome dress up panel that goes around the hood latch too.

Hope you can make it to the SC Shootout in September.

David

Thomas A
06-21-2003, 01:24 AM
if your getting the MP cool air divider, you might as well get the MP chrome dress up panel that goes around the hood latch too.
Yeah, I had planned on it, but haven't heard back from MP yet about them since they don't have them listed on the site.

Hope you can make it to the SC Shootout in September.
I wish I could, but work isn't going to allow it. It's just too close to Nationals for another weekend trip. I am hoping to make it out to the Iowa SC/GTP Challenge in October.

Thomas

FearThis SC
06-21-2003, 01:47 AM
Impressive SC, Very nice work Thomas. One day when my SC grows up, I want it to be just like his cousin (your SC) :D

May I ask, what do you have into it at this point, $ wise, if you don't mind me asking.

Calvin

jhanseling
06-21-2003, 06:33 AM
Dang Tom you really have a great looking car. Those engine bay pics are making me drool! Hopefully sometime this fall I'll be able to see the thing in person. Good luck with the tuning!

tumm37
06-21-2003, 04:28 PM
very nice...where did you get the chrome or polished water outlet neck

Thomas A
06-22-2003, 01:18 AM
May I ask, what do you have into it at this point, $ wise, if you don't mind me asking.
Sure, you can ask. I'll tell you what I tell everyone. Too Much :D

Thomas

35th_tbird
06-22-2003, 07:30 PM
quote:
--------------------------------------------------------------------------------
It's time for the peanutbutter sandwich diet
--------------------------------------------------------------------------------


Big time. I'm having a hard time with that though

don't forget about ramen noodles. they have a lot of flavors and you get like a million for dollar! lol. i know they will be a big part of my diet when i start college in the fall (plus the free food at mcdonalds, via my manager discount, BOO YEAH!) sorry just had to let that out.

on a more serious note, great looking engine you have there. makes me wish i could do that sometime soon to my 35th.

JSC
06-22-2003, 09:32 PM
Very sexy engine bay you have going there ,Thomas.....Post a pic when you have more light to work with so we can get the full effect of all that polishing !!
Come to think of it you are probably too busy driving sideways and chirping btw gears.

Jeff

Thomas A
06-22-2003, 11:22 PM
very nice...where did you get the chrome or polished water outlet neck

I had Magnum Powers polish the stock one.

Thomas

Ryan A Harris
06-24-2003, 11:51 PM
Thomas, it sure looks like all your time and effort have come together very nicely. Good work , can't wait to hear what you get out of that once she's all tuned. Keep us posted.

kamakazie_1
06-25-2003, 12:40 PM
Looks sharp Thomas!!

RJ

SeanMatteson
06-26-2003, 10:28 PM
The new setup looks killer, Thomas!!!

Cheers,

Sean