repairing/replacing pusher fan motor for 94sc

CaifanSC

SCCoA Member
I kept blowing my pusher fan fusable link inside the engine compartment so I decide to take out the fan and test it. It turns out that the motor has seized...when i plug power into the motor it tries to turn but it just doesnt. I did notice that the wires which brought power and ground to the motor (while testing it, not the actual harness) got really hot. Im thinking my motor is just shorting out but is there anything I can do to verify that? In case its shot, what other MN12'S and what years used a pusher fan? Or, who has gotten a new pusher fan motor, from where and what price? Its funny because while doing a KOEO test the puller fan (inside the engine) runs fine but it runs a HIGH and LOW speed. it was my understanding that 94-95 SC's only had a one speed puller fan and the pusher fan. Any help is greatly appreciated.
 
i picked up a pusher fan from a 94 sc (salvaged) & it has 3 wires to it. which means there should be 2 speeds.
 
Back
Top