lots of codes. where do i start?

adam_glaske

Registered User
just got my car running and after a week of driving it's started to stall occasionaly but no check engine light, so i ran the codes anyway.so here they are.

14-Profile ignition pickup circuit failure

19-DIS ignition cylinder i.d. circuit failure

22-manifold pressure out of range (somethin like that)

41-lean O2 sensor right side

66-MAF out of range

87-primary fuel pump ciruit failure

91-lean O2 sensor left side

if anyone knows how to fix any of htis please let me know.
 
lots of codes

before you drive your self nuts most of those codes are probably due to the engine stalling. so i would write down those codes then clear all the codes and drive the vehicle to let the pcm pick up the main concern. while driving if the cel comes on check for codes before the engine stalls. hope this is of some help...........Doug
 
Back
Top