Ripvanbl
Registered User
Rebuilt motor and installed brand new 42# FMS injectors and 190 lph fuel pump. When key is on, there is a clicking/clunking sound coming from the area where the airbox is (I had the #14 wire cut with the previous motor and it was fine, so that can't be it).
I can hear the fuel pump running, but there is 0 fuel pressure. I can't run any codes because the computer never gets done running through the startup process.
Any ideas?
I can hear the fuel pump running, but there is 0 fuel pressure. I can't run any codes because the computer never gets done running through the startup process.
Any ideas?