Ripvanbl
Registered User
I checked my relays and I can't come up with anything. Here is the low down. Just installed 42# FMS injectors, 190lph fuel pump, 75mm Pro-M MAF and EEC tuner board. I have the #14 wire cut and have the IC fan running off of that connection. When I went to hook up the battery, it was touching some metal and I'm guessing the IRCM has blown something. Again, the relays look fine, but ...
Key On:
- No fuel pressure, but I can hear the fuel pump running.
- IRCM and EEC making a clicking / clunking sound in rythmn like something shorting out.
- Cooling fan comes on, so IRCM is working as far as that is concerned.
I'm just looking for some opinions before I go replacing the IRCM and EEC for no reason.
Thanks
Key On:
- No fuel pressure, but I can hear the fuel pump running.
- IRCM and EEC making a clicking / clunking sound in rythmn like something shorting out.
- Cooling fan comes on, so IRCM is working as far as that is concerned.
I'm just looking for some opinions before I go replacing the IRCM and EEC for no reason.
Thanks