Wagner Clutch master cylinder-who has had prblems?

DGernmann

Registered User
Recently I replaced the clutch master cylinder in my car and was given a Wagner replacement part by parts store.

Upon further investigation the Wagner pushrod is longer maybe by a 1/2 inch and does not completely close off the valve in the master, which means air in the system. Also the part that attaches to the firewall is too small, and will come loose after a while...This part is no good and should not be used. Ford has the correct one and also the Raybestos replacement part seems to be the maker of the Ford units.

Another board member has had the same problem. We have decided to write to Wagner and let them know of the flaw.

If you have had a similar experiance please post with your comments. This is for the clutch master cylinder only. Thanks!

Drew
 
Back
Top