89BlownBrd
Registered User
One of my lifters was collapsed causing the rocker arm to not be snug tight so I went and bought a new one and put it in this morning. Well, on the old ones, the springs are so stiff that you can't push the top down any. On the new one, you can. I put it in and the rocker arm is still loose. Not as bad as it was, but it is still loose. I watched as I backed the bolt off holding it on, and the pushrod was compressing the spring in the lifter. Any ideas or feedback as to what I can do, whether the lifter is bad and not supposed to be doing that? TIA