View Full Version : Quick question, slave cylinder...

07-26-2003, 10:54 PM
I got all the tranny bolts, drive shaft, gas tank etc. off the car, and the only thing holding the tranny from me dropping it is the slave cylinder hydraulic line. (and the jack of course) I forget how to get the line off, i remember something about pushing in the white ring, but i did it on a 91, this is an 89...need to know how to get it off. Thanks in advance!


07-26-2003, 11:16 PM
They are all the same. Push the little ring into the slave and it will pop off. Don't get brake fluid in your eye, it hurts real bad. Use a pair of flat blade screwdrivers.


07-27-2003, 01:57 AM
I got it, thanks a bunch for your help!