What parts needed to fix sagging door?

I need to replace the bushings in my driver's door hinges. Is there a kit available with all the parts, or do I have to buy them individually?
Thanks.

I got the pins with bushings at AZ for about $3.50. They don't list anything for the SC, but the F150 ones fit perfect.

Are there any detailed instructions on how to do this pin/bushing change?..

Last time I had this done on a saggy door.. was on my 1993 Cougar.. but a body shop did it... an actually worked extremely well when they did it...

I was told on the 1993 that the whole hinge had to be replaced as there was not way to replace just the pin...

anyway.. bottom line.. I had a body shop do my driver door.. an it was done right... closed as good as new..

And would love to see any detailed instructions on anyone that did a do it yourself job..

last note.. I believe also the Door Latch should be replaced as well.. Correct?.. (for the best job possible)

Karl

Try this link

http://www.tccoa.com/articles/exterior/index.html#

Another one from the TBSCEC FAQs:

http://pub29.ezboard.com/fthunderbirdscenthusiastclubfrm13.showMessage?topicID=78.topic

Be sure and read through the whole thread!

Dave,

What year F150?

My SC is a 93. Anyone have any helpful hints/tricks to do this without too much hassle? Thanks.