PDA

View Full Version : flywheel holding tool



cato
08-09-2003, 03:45 PM
anyone know where I can get one?? seeing as how I don't have an air compressor, and am in the process of changing a clutch I could really use one, harbor freight used to have one, but I don't see where they do anymore thanks for any help

cudaz101
08-10-2003, 05:50 AM
As per above...Some have had sucess with this..


Brad

MercsSC
08-10-2003, 10:44 AM
you can pull a spark plug ...fill cyclinder with some nylon rope compress the cyclinder via the flywheel...and you should beable to torque on the bolts ....without it turning or sliping ....dave

supercatxr7
08-10-2003, 08:33 PM
Vise Grip works for me.

pastera
08-11-2003, 09:03 AM
use two ratchets anf a short extension

Place one with a short extension the bolt you want to work with and the other on a bolt opposite to it.
Spin the handle on the second ratchet until it hits the extension on the first.
This will give you a way of holding the flywheel from turning. You may need to put a pipe over the handle to get enough leverage to hold everything still.

Aaron