tb linkage feels "tight"

joenintiesc

Registered User
I bought a 75mm tb from a fellow member and it appears to be a Mustang modded tb. Is there anyway to adjust the linkage, specifically the spring mechanism where it attaches to the tb, to loosen it up a bit? It feels too tight- when I depress the accelerator it take more force than it did previously with the stock tb...

Any suggestions?

Thanks
 
i have the same one.....that style from a stang. My pedal feels tight also..thats jsut because of the stiffer spring compared to the stock one.
 
Yes, you can change the spring tension. First note how/where the spring is positioned. Then just pop the spring loose at one end carefully and it will unwind itself (very quickly!). Then wind it back until the pedal feels right. I had to do this with my BBK TB, when I got it the pedal was so hard it felt like I was driving our old diesel Suburban...
 
Back
Top