Blower nose seal leaking, can i get a new one?

Hey guys

My blower is leaking a fair bit now and I would like to fix this, as I will soon have money to spend...(I hope)....Where is the best place to get a new seal? and do i need anything else aswell?
Oh and while im at it my suspension bushings are totally gone in the rear end. I have been planning on ordering a set of Polyurathane bushings from Supercoupe Performance.
My question here is do i have to worry about having damaged anything back there the rear end goes "clunk" when i shift.

Thanks
Keith

There are two possible replacements. The stock seal is replaced with Chicago Rawhide seal #7966 .

There is a better seal that is double lipped and made out of viton that should last longer and is CR#7968.

Here is a thread on replacing that seal with all the info:

http://host.sccoa.com/forums/showthread.php?s=&threadid=24174&highlight=snout+seal

It's not good to drive with bad bushings as the moving parts making the clunk can wear on the bore that the bushing fits in, causing the bushing to no longer fit tight or weakening the metal.

yes

I was afraid of that with the bushings....I hope i didnt do to much damage before i parked it

thanks