setting timing....

ok well i see there are 2 lines... one on the crank and one on the cam.... i point the cam one down towards the crank and the crank one towards the cam and make sure there right on....


then the the cam sensor has to be adjusted well the thing inside it does the 1/2 moon.... but i dont knwo where it needs to be adjusted to does anyoen have a pic outta the chilton or anythign they can post to show me the location of where its supposed to be


thx soo much

For the cam position sensor, here you go:
http://pub29.ezboard.com/fthunderbirdscenthusiastclubfrm13.showMessage?topicID=114.topic

It took me hours of searching to find this when I did mine not long ago. You DON'T need the tool, it's pretty simple as shown.

The post it came from:
http://www.sccoa.com/forums/showthread.php?threadid=21589&highlight=positioning+tool