intercooler upgrade?

Brianas

Registered User
can some one piont me in the right direction for this part
I see magnum powers new unit like 1500-1600 and then theres the dbl ic-which is the better bang for the buck?
as I understand or have heard the stock ic only flows like 250 cfm
is this true? sounds very wimpy
my motor is basically cmre stg 1 with the mp2 stuff and all the bolts on exhaust etc.. except for a stock IC and stock tubes
what should I do
thanks for any input
Josh
 
I'd go with the double IC 1st.

Trying to push more hot air through the stock unit won't buy you that much. Cooling/condensing what you've already got will probable net you more.
I don't have personal experience with it, but from what I've heard, the MP FMIC will make more power, but has some engine cooling downside.

Lee
 
The MP front mount is the only FM made for the SC as a boltin proposal..So your stuck with that unless you get a custom one made somewhere...Also some sell double IC which are two stock IC welded together..They improve flow a tad but are are still in factory location....Me I would get a good spearco core and hav eone made using my factory end tanks in the factory location..Its a good compramise
 
Back
Top