PDA

View Full Version : intercooler upgrade?



Brianas
09-13-2003, 12:45 PM
can some one piont me in the right direction for this part
I see magnum powers new unit like 1500-1600 and then theres the dbl ic-which is the better bang for the buck?
as I understand or have heard the stock ic only flows like 250 cfm
is this true? sounds very wimpy
my motor is basically cmre stg 1 with the mp2 stuff and all the bolts on exhaust etc.. except for a stock IC and stock tubes
what should I do
thanks for any input
Josh

rivlee
09-13-2003, 01:11 PM
Trying to push more hot air through the stock unit won't buy you that much. Cooling/condensing what you've already got will probable net you more.
I don't have personal experience with it, but from what I've heard, the MP FMIC will make more power, but has some engine cooling downside.

Lee

XxSlowpokexX
09-13-2003, 01:30 PM
The MP front mount is the only FM made for the SC as a boltin proposal..So your stuck with that unless you get a custom one made somewhere...Also some sell double IC which are two stock IC welded together..They improve flow a tad but are are still in factory location....Me I would get a good spearco core and hav eone made using my factory end tanks in the factory location..Its a good compramise