Randy N Connie
Registered User
Got my motor and tranny back in.Went to start it .And it just made a click.
I check all the wires every thing seems to be hook up.The battery is full
charge.Every thing works but when I turn the key to start it makes one click.
I replaced the tranny is there something that I should adjust on a 1990 auto
trans,that would keep it from starting.The wire on the starter is tight.The
small wire on the starter is pluged in.Ground wires on both sides of the motor
are on the motor mount.The wires are pluged in at the trans.
The trans is out of a 93 SC.
RANDY
I check all the wires every thing seems to be hook up.The battery is full
charge.Every thing works but when I turn the key to start it makes one click.
I replaced the tranny is there something that I should adjust on a 1990 auto
trans,that would keep it from starting.The wire on the starter is tight.The
small wire on the starter is pluged in.Ground wires on both sides of the motor
are on the motor mount.The wires are pluged in at the trans.
The trans is out of a 93 SC.
RANDY
Last edited: