Abs

turbospeed

Registered User
my 1990 SC has the abs brakes removed by the previous owner, i want to reinstall the abs system , the abs computer still in the car. what else will i need ??

It is posible to intall a 93+abs system? or will be simpler to install the 1990 system?
 
Well...hard to say what you will need since I don't know what all was removed.

Briefly you need another ABS Hydraulic Actuator and a way to connect it back into the brake system. Don't know what was done to interface with the pedal but you need to hook the pushrod back up to the pedal assembly.

Yow need all four wheel sensors and the harness to get the signal to the ABS Computer.

You need the harness to support the ABS Hydrauilc Actuator operation. (That hooks up power to the unit and motor and the alarm function for brake fluid level. Also the interconnects to the computer. (ABS Motor Relay and ABS Power Relay in there too)

As far as going to the Mark IV 93 and up system..............forget it...there are too many differences to make this practical...possible yes...practical...NO.
 
Back
Top