Caliper slide Pins

Billabong089

Registered User
The slide pins are fine I had no problem getting them out but the rubber boots that go on the pins have rips in them, where can I replace them so they don't seize up and make me pay tons of mooooooooooooooonneeeey...


thanks guys
 
I bought some from Autozone. They were inexpensive. I also bought new pins for the fornt when I did it. The new pins were 10mm bolts I think so now I do not have to use star wrenches.
 
I know, but everyone is avoiding my question where can I get replacement slide pin dust rubber boot covers, Is it a easy thing to get or would I have to get all new slide pins and crap?
 
Yes you can get the rubber boots only, they are only a buck or 2 each. I didn't need pins but they should have them to. Good luck
 
Billabong089 said:
I know, but everyone is avoiding my question where can I get replacement slide pin dust rubber boot covers, Is it a easy thing to get or would I have to get all new slide pins and crap?
Sorta looks like the very first response answered your question. ;) ;)
 
Back
Top