Just be sure that front cover gasket is the new replacement one, check the part # with Ford because the old ones caused a big stink when they broke down and leaked (like mine did). Mine looked different from that one.
I would get a manual for the car, it will help you alot, especially the pictures and torque specs. We can post a thousand replies and they wouldn't help as much as a manual. Draw a picture on cardboard and place your bolts there (take your time!). Check cover with a straight-edge, if it aint flat it will leak (like mine). They usually warp at the top. Use black RTV at base of oil pan, use plenty of yellow gasket adhesive on gaskets. There is one, maybe two bolts intersecting the water pump that need teflon on the threads (again get the manual). Just follow directions on everything and you be alright.
Oh, and do a search, everything has been covered at least twice.